- Calculator
- Lock
- Safety Glasses
- Hearing Protection
- Digital Multi-meter - with 10 amp . D.C. capabilities (costs vary from about $65 to $250 with most students purchasing in the $100 range) Insulated test leads (Radio Shack #278-001)
- Basic Tool Set (many students already have several items on the list and need to purchase only the ones they are lacking)
- A 3 to 6 drawer tool box
- ¼ drive components including a drive ratchet, a drive extension, T handle and the following sockets: six point, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8 , 7 /16, and 1/2. Metric six point, 6mm thru 13 mm. 1/ 4 universal joint, 1/4 to 3/8 adapter.
- 3/8 drive components including a drive ratchet, a drive extension and the following sockets: six point, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16 ,3 /4, 13/16. Metric, six point 8mm thru 19mm. Metric 6 point deep 8mm thru 19 mm., 3/8 universal joint, 3/8 to 1/4 adapter.
- 13/16 spark plug socket
- 3/8 impact driver with bits
- Combination wrench set: 5/16 thru 13/16
- Ignition wrench set: 3/16 - 1/2
- Metric combination wrench set: 8mm thru 19 mm
- A punch and chisel set to include 1/8 and 3/16 pin punches, 3/8 center punch, and a small chisel.
- Dead blow hammer: ( compothane style) 24 oz.
- Ball pein hammer: 16 oz
- Screwdriver set: 7 piece (to include #1, #2, #3 phillips and straight blades)
- Pliers: 6" needle nose, 7" side cutters, 6" slip joint, 9" water pump pliers, 7" locking pliers, and wire crimping/stripping/cutting pliers.
- 10: adjustable wrench
- Ball end hex key set with indexing case: 5/64 to 5/16 and 2mm to 8mm
- Spark plug wire gap gauge: .015-.035"
- Feeler gauges: to include .0015 to .025
- 4 piece pick set
- " vacula " air blow gun with rubber tip and type C male adapter.
- 6/12 volt test light
- Tire valve core tool
- Tire air chuck
- Extendable mirror
- Extendable magnet
- Putty knife (gasket scraper)
- Spark tester
- 12 ft. tape measure
- 6" rule (standard/metric) Revised 11/28/01
Last Updated: October 17, 2007 12:30 PM
